CPS Screening Tool
80% utilisation limit · final lift-plan verification required
Pad Size Calculator

Screen Pad Size
For Your Lift

Enter the verified maximum outrigger reaction and a site-assessed ground-capacity value. The tool screens candidate CPS pads against bearing area and manufacturer-listed pad capacity; it does not approve a lift or confirm the ground.

1Reaction
2Ground
3Result

Verified Maximum Reaction Per Outrigger

Use the highest outrigger reaction for the planned lift from manufacturer data, the duty chart or the lift plan. Gross crane or vehicle weight divided by the number of outriggers is not a valid substitute.

Tonnes
Enter the load in tonnes (e.g. 12 for a 12-tonne outrigger load)

Ground-Capacity Screening Input

The values below are CPS examples for early screening only. The final value must come from a competent assessment of the actual surface and supporting layers.

Your Result
— T on — (— kN/m²)
Screening Pad Area
— m²
80% utilisation of entered ground value · Raw area at 100%: — m²
Equivalent Screening Square Side
— mm

Still not sure which pad fits your job?

Ground and lift configurations vary. We can help shortlist a product, but the appointed person and competent ground assessment must confirm the final pad for the planned lift.

📞 Call 07752 806706 ✉ Email Us
Already have a pad? Use the Ground Bearing Calculator to screen calculated pressure against an assessed ground input, then verify the final design.
Ground Bearing Check →
Screening limitation: The selectable ground values are CPS examples, not site design values or a substitute for ground investigation. The calculation limits pressure to 80% of the entered value as a screening reserve; this is not a universal factor of safety. The lift plan must verify the reaction, ground, float geometry and exact manufacturer-listed pad capacity.