Outrigger Pads
for Plant Hire Companies

Volume supply of UHMW-PE outrigger pads for crane, MEWP, HIAB and telehandler fleets. One supplier, consistent spec across every machine, trade pricing for repeat orders. UK stock.

UK Stock Items — Next Day Delivery
No Minimum Order
Trade Pricing Available
All Prices Ex. VAT
Core Range in UK Stock

Why Fleet Operators Switch

UHMW-PE vs Timber and Steel

Most plant hire companies start with timber or steel. Most switch to polymer once they've replaced a set of timber mats.

The Problem with Timber

Timber Mats Cost More Over Time

Timber absorbs water and loses load-rated capacity the moment it starts to degrade. Splitting, cracking, and splintering on site creates a safety and liability issue. Most hire companies end up replacing a set of timber mats every 18–24 months.

  • UHMW-PE will not split, crack, or absorb water
  • No nails, bolts, or metal fixings to fail or corrode
  • Consistent rated capacity across the service life
  • Same performance in every weather condition
  • No rot, no swelling, no maintenance cost

The Problem with Steel

Steel is Heavy, Marking, and Awkward

Steel spreader plates distribute load from the edges rather than across the full surface, and they mark tarmac, block paving, and concrete — which creates problems on customer sites. They're also heavy enough to require two people to handle safely.

  • UHMW-PE distributes load across the full pad surface
  • Will not mark tarmac, block paving, or flagstone
  • Up to 80% lighter than equivalent steel plate
  • One person can handle and position most sizes
  • No rust, no sharp edges, no PPE required to handle

Fleet Sizing Guide

Which Pad for Which Machine

A starting point for fleet spec. Use the pad size calculator for site-specific load calculations.

Machine Type Typical Outrigger Load Recommended Pad Price (ex. VAT) Shop
Scissorlift / Small MEWP Up to 5 tonnes 400×400×40mm Essential £48 per pad Shop
Boom Lift / Cherry Picker Up to 8 tonnes 500×500×40mm Essential £65 per pad Shop
HIAB / Lorry Loader Up to 20 tonnes 600×600×40mm Essential £95 per pad Shop
Light Mobile Crane (up to 25t) Up to 21 tonnes 600×600×40mm Premium £85 per pad Shop
Mobile Crane (25–55t) Up to 42 tonnes 800×800×50mm Premium £180 per pad Shop
Large Mobile / City Crane Up to 126 tonnes 1200×1200×80mm Premium £620 per pad Shop

Outrigger loads vary by machine, configuration and lift. Always verify against your crane's load chart. Use the pad size calculator for a ground-bearing pressure check.

Need a Fleet Quote?

Tell us your machines and how many pads you need. We'll confirm stock and give you trade pricing same day.

Fleet Supply

Built for Repeat Orders

We supply individual pads and full fleet kit-outs. No minimums, no lock-in.

Volume Discounts

Pricing improves on larger orders. Call us if you're buying 10 pads or more and we'll give you the right number. No pressure, just fair trade pricing.

Consistent Specification

Every pad from the same range is the same material, same thickness, same load rating. Your operators always know what they're working with across every machine in the fleet.

UK Stock, Next Day Delivery

Core pad sizes are held in UK stock. Stock items ordered before 2pm can be delivered on the next working day. Heavy Lift and other project-led pads are quoted with a confirmed lead time.

Technical Support Included

Not sure which size for a specific machine? Call us. We'll work through the outrigger loads with you and make sure you're getting the right pad, not just the most expensive one.

Ready to Kit Out Your Fleet?

Browse the full range online, use the calculator to confirm your pad size, or call us to discuss fleet pricing. We're a specialist — not a generalist distributor.